ERROR MESSAGES
26
SYMBOL CAUSE CORRECTION
Wrist cuff not applied
correctly.
Apply the wrist cuff correctly. Refer to
“Applying the Wrist Cuff”.
Movement during
measurement.
Carefully read and repeat the steps in
section
“
Taking a Measurement
”
.
Irregular heartbeats are
detected.
Please remove the wrist cuff, and wait
2-3 minutes. Reapply the wrist cuff and
take another measurement.
Repeat the steps in section “Taking a
Measurement
”
.
If this error continues to appear, contact
your physician.
Do not hold the wrist cuff. Remain still
and do not talk during measurement.
Refer to “Taking a Measurement”.
Remain still until the measurement is
complete. Refer to “Taking a
Measurement”.
Apply the wrist cuff correctly. Refer to
“Applying the Wrist Cuff”.
Remain still and do not talk during
measurement. Refer to “Taking a
Measurement”.
Movement during
measurement.
Wrist cuff not applied
correctly or movement
during measurement.
Arm position changed
during measurement.
To Next Page
Loading...
