Omron BP653 - Using the Memory Function; Viewing Stored Readings; Viewing Average Reading

USING THE MEMORY FUNCTION
The monitor automatically stores up to 100 readings for each user (1 and 2). It can also
calculate an average reading based on the last 3 readings taken within 10 minutes.
TO VIEW THE READINGS STORED IN MEMORY
1. Select your USER ID (1 or 2).
2. Press the button.
The Memory number appears for a second
before the pulse rate is displayed. The most
recent reading is numbered “1”.
NOTES: • If the positioning indicator is set to “on”
before the measurement, the positioning
indicator is displayed with the readings.
• When viewing the readings taken without
setting the date and time, “-:--” is displayed
instead of the date and time.
• If there are no readings stored in the memory, the
screen to the right is displayed.
3. Press the button repeatedly to view the readings stored in
the memory.
TO VIEW THE AVERAGE READING
1. Select your USER ID (1 or 2).
2. When the unit is off, press and hold the button
for more than 2 seconds.
NOTES: • If the previous measurement was taken without setting the date and time,
the average reading is not calculated.
• If there are only 2 readings in the memory for that period, the average
will be based on these 2 readings.
• If there is 1 reading in the memory for that period, this is displayed as
the average.
Alternating
date/time
display
20