TAKING A MEASUREMENT
As the cuff inflates, the monitor automatically determines your ideal inflation level.
This monitor detects your blood pressure and pulse rate during inflation.
The Heartbeat Symbol ( ) flashes at every heartbeat.
Remain still and do not move until the entire measurement process is completed.
After the monitor has detected your blood pressure and pulse rate, the cuff
automatically deflates. Your blood pressure and pulse rate are displayed.
NOTE: To stop the inflation or measurement, push the START/STOP button. The
monitor will stop inflating, start deflating, and will turn off.
4. Press the START/STOP button to turn the monitor off.
NOTES: • The monitor will automatically turn off after 2 minutes.
•
Wait 2-3 minutes between measurements. The wait time allows the arteries
to return to the condition prior to taking the blood pressure measurement.
You may need to increase the wait time depending on your individual
physiological characteristics.
INFLATESTART DEFLATE COMPLETE
TURN OFF (ON) THE POSITIONING INDICATOR
The positioning indicator is set “on” as default.
1. Select your USER ID (1 or 2).
2.
When the unit is off, press and hold the / and button for more than 5 seconds
to set the positioning indicator.
3. Press the START/STOP button to store the positioning indicator setting.
19
To Next Page
Loading...
Need help?
General
