Omron CJ1W-PRT21 - Page 120

Appendices
A-12
CJ-series PROFIBUS Slave Unit Operation Manual for NJ-series CPU Unit (W510)
; Default configuration
;1 word Out (No Cons.)
;1 word In (No Cons.)
; I/O definitions:
Module = " 1 word In/Out" 0xF0 ; 1 word I/O.
EndModule ;
Module = " 2 words In/Out" 0xF1 ; 2 words I/O.
EndModule ;
Module = " 4 words In/Out" 0xF3 ; 4 words I/O.
EndModule ;
Module = " 8 words In/Out" 0xF7 ; 8 words I/O.
EndModule ;
Module = "16 words In/Out" 0xFF ; 16 words I/O.
EndModule ;
; Output definitions:
Module = " 1 word Out (from master)" 0xE0 ; 1 word Out.
EndModule ;
Module = " 2 words Out (from master)" 0xE1 ; 2 words Out.
EndModule ;
Module = " 4 words Out (from master)" 0xE3 ; 4 words Out.
EndModule ;
Module = " 8 words Out (from master)" 0xE7 ; 8 words Out.
EndModule ;
Module = "16 words Out (from master)" 0xEF ; 16 words Out.
EndModule ;
; Input definitions:
Module = " 1 word In (to master)" 0xD0 ; 1 word In.
EndModule ;
Module = " 2 words In (to master)" 0xD1 ; 2 words In.
EndModule ;
Module = " 4 words In (to master)" 0xD3 ; 4 words In.
EndModule ;
Module = " 8 words In (to master)" 0xD7 ; 8 words In.
EndModule ;
Module = "16 words In (to master)" 0xDF ; 16 words In.
EndModule ;
;
Module = "=== Non-consistent I/O (S7) ===" 0x00 ; No consistency
Endmodule ; (for S7 Master)
;
; I/O definitions:
Module = " 1 word In/Out (No Cons.)" 0x70 ; 1 word I/O.
EndModule ;
Module = " 2 words In/Out (No Cons.)" 0x71 ; 2 words I/O.
EndModule ;
Module = " 4 words In/Out (No Cons.)" 0x73 ; 4 words I/O.
EndModule ;
Module = " 8 words In/Out (No Cons.)" 0x77 ; 8 words I/O.
EndModule ;
Module = "16 words In/Out (No Cons.)" 0x7F ; 16 words I/O.
EndModule ;
; Output definitions: