11 - 25
11 EtherNet/IP Coupler Unit Functions
NX-series EtherNet/IP Coupler Unit User’s Manual (W536)
11-6 Changing Event Levels
11
11-6-3 Procedure to Change an Event Level
The Edit Unit Operation Settings Tab Page is displayed.
2 From the events for which Level setting is displayed, select the event for which you want to
change the level, and then select a level from the list in the Value field.
3 After you make the change, go online and click the Transfer to Unit button to transfer the
change to the Controller.
The specified event level is changed.
There are no events for the EtherNet/IP Coupler Unit for which you can change the event level.
To Next Page
Loading...
Need help?
General
