Omron CJ2H-CPU6*-EIP Series - Page 30

7
．
EtherNet/IP Connection Procedure
27
7.3.2. Starting CX-Programmer and Connecting Online with PLC
Start CX-Programmer and connect online with PLC.
Install CX-One and the USB driver on Personal computer beforehand.
1
Start CX-Programmer.
*If the User Account Control
Dialog Box is displayed at start,
make a selection to start
CX-Programmer.
2
CX-Programmer starts.
3
Select Auto Online - Direct
Online from the PLC Menu.
4
The Direct Online Dialog Box is
displayed.
Select USB connection as
Connection Type.
Click Connect.