Omron CJ2H-CPU6*-EIP Series - 4 Overview

4
．
Overview
4
4. Overview
This document describes the procedures for connecting Displacement Sensor (hereinafter
referred to as Sensor Controller) to CJ-series Programmable Controller + EtherNet/IP Unit
(hereinafter referred to as PLC) via EtherNet/IP, both produced by OMRON Corporation
(hereinafter referred to as OMRON), and for checking their connections.
Refer to Section 6. EtherNet/IP Settings and Section 7. EtherNet/IP Connection Procedure to
understand setting methods and key points to operate EtherNet/IP tag data links.
In this document, CJ-series EtherNet/IP Unit and the built-in EtherNet/IP port of CJ-series CJ2
CPU Unit are collectively called as "EtherNet/IP Unit''.