Omron CJ2H-CPU6*-EIP Series - Initializing Sensor Controller

8
．
Initialization method
56
(4)The Restart Unit Dialog Box is displayed. Select Return to out-of-box configuration, and
then emulate cycling power, and click OK.
(5)A dialog box is displayed indicating that the execution is completed. Check the contents
and click OK.
8.1.2. CPU Unit
To initialize the CPU Unit settings, select Clear All Memory Areas from the PLC Menu in
CX-Programmer. Select Initialize in the Confirm All Memory Area Clear Dialog Box and click
OK.
8.2. Initializing Sensor Controller
For information on how to initialize Sensor Controller, refer to Initializing Settings in 8-11
Setting the System in 8. Sensor controller operations of the Displacement Sensor ZW-7000
series Confocal Fiber Type Displacement Sensor User’s Manual (Cat. No. Z362).