Omron CJ2M-CPU Series Connection Guide

7
．
Serial Communications Connection Procedure
35
14
Start MEXE02 and display the
edit window for Operation data.
*For information on how to start
and operate MEXE02, refer to
steps 2 to 7 in 7.2.2. Parameter
Settings.
15
Select Status,I/O monitor from
the Tool Menu.
16
The Status, I/O monitor Window
is displayed.
Select Start the Status, I/O
monitor.
17
Check the OUTPUT status of
I/O (direct I/O) signals.
The OUTPUT status on the right
shows as follows:
OUT0: OFF (White)
OUT1: ON (Green)

Omron CJ2M-CPU Series Specifications

General

Power Supply	24 VDC
Number of Instructions	Over 400 instructions
Model	CJ2M-CPU11, CJ2M-CPU12, CJ2M-CPU13, CJ2M-CPU14, CJ2M-CPU15
Program Capacity	5K steps to 60K steps
I/O Capacity	Up to 2, 560 points
Communication Ports	Ethernet, USB, RS-232C
Execution Time	0.04 µs per basic instruction
Operating Temperature	0 to 55°C
Position Control	Supported
High-speed Counter	100 kHz max.
Pulse Output	100 kHz max.
Maximum Units	40 units
Storage Temperature	-20 to 75°C
Interrupt Inputs	Supported