132
5-5. Handling Errors
If an error occurs before or during measurement, an alarm will sound and an error message will
appear. If the error still occurs after you follow the instructions in the message, turn off the power
and contact a dealer or an Omron Healthcare technical support representative.
Types of Audible Alarms
Audible alarm Error level Description
"Beep beep beep - beep beep" High
The alarm sounds repeatedly. A serious problem has
occurred in the device, or an abnormality has occurred to
the patient. Measurement cannot be performed in this
state. You must check the error.
"Beep beep beep" Medium
The alarm sounds repeatedly. A problem has occurred
that makes measurement difficult. You must check the
error.
BP-203RPE3(A).fm 132 ページ ９年月６日 土曜日 午後５時４分
To Next Page
Loading...
