40
2-1. Preparing for Measurement
Displaying the Measurement History
A history of the patient's past measurement data can be displayed.
The measurement history can only be viewed from the confirm patient Information screen.
1. Press the [MEAS. HISTORY] button.
2. View the measurement history in the measurement
history screen.
3. Press the [OK] button.
You will return to the patient information screen.
The value shown in baPWV is the higher of
the left and right values, and the value
shown in ABI is the lower of the left and
right values.
Notes:
• An ABI (Ankle Brachial Index) value marked by * is a measured TBI (Toe Brachial Index) value.
• The TBI package is required for TBI measurement. If the TBI package is installed, read the
accompanying manual.
BP-203RPE3(A).fm 40 ページ ９年月６日 土曜日 午後５時４分
To Next Page
Loading...
