54
2-3. Measurement Results
Measurement Results Reports
The measurement results reports that are printed when measurement ends are explained below.
The types of reports are as follows.
Type Description Page
Standard
Measurement results report that is retained by the medical
organization that conducted the examination.
55
Patient Measurement results report to be given to the patient.
60
Trend
This indicates measurement data trends based on
comparison with past data.
64
Notes:
• Do not turn off the power while printing is in progress. This may damage the internal memory.
• You can also set reports not to print after measurement. The initial setting is "1 sheet".
Refer to "3-3. Print Default Settings" (page 80).
• To print additional reports after measurement, press the "PRINT REPORT" button in the
measurement results screen. You can also print a report without performing measurement.
Refer to "Reprinting Measurement Data" (page 95).
• The special LAN cable that is sold separately can be used to connect the device to a computer
to send a report to the computer.
Refer to "3-11. Transferring Report Data (PC)" (page 120).
BP-203RPE3(A).fm 54 ページ ９年月６日 土曜日 午後５時４分
To Next Page
Loading...
Need help?
General
