34
2-1. Preparing for Measurement
Setting the Measurement Sensors
1. Press the [MEAS. SENSOR] button.
2. Set the measurement sensors.
• Specify settings for the ECG, PCG.
Sensor attached: [ON]
Sensor not attached: [OFF]
3. Press the [OK] button.
To cancel entry, press the [CANCEL] button.
Note:
Even when ECG is "OFF", if the HR Synchronized tone setting is "ON" and the ECG clip is
attached, the beep sound will be heard.
BP-203RPE3(A).fm 34 ページ ９年月６日 土曜日 午後５時４分
To Next Page
Loading...
