Omron Colin BP-203RPE III - Basic Measurement; Viewing the Measurement Screen

47
2-2. Basic Measurement
Viewing the Measurement Screen
After the patient information has been entered and the cuffs and sensors have been attached to
the patient, measurement can be started.
Press the [NEXT] button in the new patient information registration screen or the patient
information review screen to proceed to the measurement screen.
Notes:
• If "ECG" was set to "OFF" in the "SELECT MEASUREMENT SENSOR" settings when the
patient's information was entered (refer to page 34), ECG messages and the ECG wave will
not appear.
• If "PCG" was set to "OFF" in the "SELECT MEASUREMENT SENSOR" settings when the
patient's information was entered (refer to page 34), PCG messages, the PCG level, and the
PCG wave will not appear.
BP-203RPE3(A).fm 47 ページ 󲥿󲥽󲥽９年󲥾󲥿月󲥿６日 土曜日 午後５時４󲥿分