20
1-7. Installation/Moving
Procedure for Moving
When you need to move the device, follow the procedure below.
1. Turn the power switch to the off ( ) position.
2. Remove the power plug from the outlet and coil the
cord.
Please do not pull the power cord.
3. Store the sensors on the arm.
4. Store the cuffs in the cuff storage pocket.
5. Hang the sensor box cable on the cable hook.
BP-203RPE3(A).fm 20 ページ ９年月６日 土曜日 午後５時４分
To Next Page
Loading...
