39
2-1. Preparing for Measurement
Selecting the Technician
Select the technician from the list. The list must be stored in advance.
Refer to "3-4. Facility name / Doctor / Technician / Category Settings" (page 86).
1. Press the [TECHNICIAN] button.
2. Select the technician and press the [OK] button.
• If an technician name is not necessary, press
<UNSELECT>.
• To cancel entry, press the [CANCEL] button.
Selecting the Category
The medical department category of the patient can be entered. Select from the list. The list must
be stored in advance.
Refer to "3-4. Facility name / Doctor / Technician / Category Settings" (page 86).
1. Press the [CATEGORY] button.
2. Select the category and press the [OK] button.
• If a category name is not necessary, press
<UNSELECT>.
• To cancel entry, press the [CANCEL] button.
BP-203RPE3(A).fm 39 ページ ９年月６日 土曜日 午後５時４分
To Next Page
Loading...
