Omron Colin BP-203RPE III - Page 39

37
2-1. Preparing for Measurement
5. Press the [OK] button.
To cancel entry, press the [CANCEL] button.
Notes:
• The optimum value for the pressurizing limit is generally "maximum blood pressure + 60 mmHg".
• If the pressurizing upper limit setting is not suitable, the measured values of the blood pressure
may be low as shown below.
Set the pressurizing upper limit while checking measurement accuracy on a pulsation variation
graph.
Good accuracy Poor accuracy when
pressurizing is not
sufficient
BP-203RPE3(A).fm 37 ページ 󲥿󲥽󲥽９年󲥾󲥿月󲥿６日 土曜日 午後５時４󲥿分