74
Specifications Section 2-2
■ Output Load Current and Ambient Temperature
(CP1W-32ER/16ER)
With the CP1W-32ER/16ER, the load current is restricted depending on the
ambient temperature. Design the system considering the load current based
on the following graph.
Transistor Output (Sinking or Sourcing)
Note (1) The fuse cannot be replaced by the user.
Output load current (%)
50
100
55 43
Ambient temperature (°C)
Item Specification
CP1W-40EDT
CP1W-40EDT1
CP1W-32ET
CP1W-32ET1
CP1W-20EDT
CP1W-20EDT1
CP1W-16ET
CP1W-16ET1
CP1W-8ET
CP1W-8ET1
Max. switching
capacity
(See note2.)
4.5 to 30 VDC
0.3 A/output
4.5 to 30 VDC
0.3 A/output
24 VDC
10%
/
−5%
0.3 A/output
4.5 to 30 VDC
0.3 A/output
• OUT00/01 4.5 to
30 VDC, 0.2 A/
output
• OUT02 to 07 4.5
to 30 VDC, 0.3
A/output
0.9 A/common
3.6 A/Unit
0.9 A/common
7.2 A/Unit
0.9 A/common
1.8 A/Unit
0.9 A/common
3.6 A/Unit
0.9 A/common
1.8 A/Unit
Leakage current 0.1 mA max. 0.1 mA max. 0.1 mA max. 0.1 mA max. 0.1 mA max.
Residual voltage 1.5 V max. 1.5 V max. 1.5 V max. 1.5 V max. 1.5 V max.
ON delay 0.1 ms max. 0.1 ms max. 0.1 ms. 0.1 ms max. 0.1 ms max.
OFF delay 1 ms max.
24 VDC
+10%
/
−5%
5 to 300 mA
1 ms max.
24 VDC
+10%
/
−5%
5 to 300 mA
1 ms max.
24 VDC
+10%
/
−5%
5 to 300 mA
1 ms max.
24 VDC
+10%
/
−5%
5 to 300 mA
1 ms max.
24 VDC
+10%
/
−5%
5 to 300 mA
Max. number of
Simultaneously
ON Points of Output
16 pts (100%) 24 pts (75%) 8 pts (100%) 16 pts (100%) 8 pts (100%)
Fuse (See note 1.) 1 fuse/common
Circuit configuration
COM (−)
OUT
OUT
L
L
COM (+)
OUT
OUT
L
L
Sinking Outputs Sourcing Outputs
Output LED
Output LED
Internal
circuits
Internal
circuits
24 VDC/4.5
to 30 VDC
24 VDC/4.5
to 30 VDC
To Next Page
Loading...
