Omron CP1H-X40D - Compobus;S I;O Link Units

478
CompoBus/S I/O Link Units Section 7-6
7-6 CompoBus/S I/O Link Units
The CP1H can function as a slave to a CompoBus/S Master Unit (or SRM1
CompoBus/S Master Control Unit) when a CP1W-SRT21 CompoBus/S I/O
Link Unit is connected. The CompoBus/S I/O Link Unit establishes an I/O link
of 8 inputs and 8 outputs between the Master Unit and the PLC. Up to three
CompoBus/S I/O Link Units, including other Expansion I/O Units, can be con-
nected to a CP1H CPU Unit.
From the standpoint of the CP1H CPU Unit, the 8 input bits and 8 output bits
allocated to the CompoBus/S I/O Link Unit are identical to input and output
bits allocated to Expansion I/O Units even though the CompoBus/S I/O Link
Unit does not control actual inputs and outputs. The input and output bits allo-
cated to the CompoBus/S I/O Link Unit are one side of an I/O link between the
slave CPU Unit and the CPU Unit to which the Master Unit is connected.
Specifications
CP1H CPU Unit
Special flat cable or VCTF cable
B D L NC( B S - ) N C
B D H NC( B S + )
S
COMM
ERR
ON
12 3
4
5
6
No.
SRT21
EXP
CompoBus/S Master Unit
(or SRM1 CompoBus/S
Master Control Unit)
CP1W-SRT21
CompoBus/S
I/O Link Unit
Master PC (CS Series)
CPU Unit
CP1H
I/O memory
Input
CIO 2
Output
CIO 102
8 bits
8 bits
I/O memory
Input
CIO 2004
Output
CIO 2000
8 bits
8 bits
CompoBus/S
Master Unit
Unit No. 0
CompoBus/S
I/O Link Unit
Node
number: 0
Model number CP1W-SRT21
Master/slave CompoBus/S Slave
Number of I/O points 8 input points, 8 output points
Number of words allocated in
CPU Unit I/O memory
1 input word, 1 output word
(Allocated in the same way as Expansion Units and
Expansion I/O Units.)
Node number setting Set using the DIP switch
(Set before turning on the CPU Unit’s power supply.)