571
Web Browser Setup and Display Section 9-10
If the local IP address in the system setup is set to 0.0.0.0, this area will act as
an IP address setting area. The value will be read by the Ethernet Option
Board when the power is turned ON or the Ethernet Option Board restarted
and is used as the local IP address.
If the IP address for accessing the Ethernet Option Board through Web browser
is forgotten, find out it in th
is area.
Note When IP address in system setup area and DM area are all set to 0.0.0.0, the
IP address will be 192.168.250.1 (FINS node address).
9-10 Web Browser Setup and Display
9-10-1 Multi-language Function
The WEB server supports the multi-language function. The supported lan-
guages are English, Chinese and Japanese.
Before setting, users should select the appropriate language in the following
ULC.
English page: http://(Ethernet Option Board’s IP address)/E00.htm
Japanese page: http://(Ethernet Option Board’s IP address)/J00.htm
Chinese page: http://(Ethernet Option Board’s IP address)/C00.htm
9-10-2 Overview of Web Browser Function
System setup for the Ethernet Option Board is as follows.
Monitor status for the Ethernet Option Board is as follows.
Setting Item Reference Page
System IP Address 572
Subnet Mask 572
FINS Node Address 572
FINS/UDP Port 572
FINS/TCP Port 572
Address Conversion Mode 572
FINS/UDP Option 572
Broadcast Option 573
FINS/TCP Protected 573
HTTP WEB Password 574
Port No. 574
IP Address Table FINS Node Address 575
IP Address 575
IP Router Table IP Network Address 576
Router IP Address 576
FINS/TCP IP Address 577
Auto-allocated FINS Node 577
Status Reference Page
Unit information 578
Unit status 579
FINS status 580
Error log 581
To Next Page
Loading...
