467
Temperature Sensor Units Section 7-5
7-5-3 CP1W-TS004 Temperature Sensor Units
CP1W-TS004 Temperature Sensor Unit provide up to twelve input points.
The inputs can be from thermocouples.
CP1W-TS004 Temperature Sensor Unit is allocated two input words and one
output word, so no more than seven Units can be connected.
Part Names
Temperature Sensor Units:
CP1W-TS004
(1) Temperature Sensor Input Terminals
Used to connect temperature sensors such as thermocouples.
(2) DIP Switch
Used to set the temperature unit (°C or °F) and the temperature input
range. Make the setting according to the specifications of the tempera-
ture sensors that are connected.
(3) Expansion I/O Connecting Cable
Connected to the expansion connector of a CP1H CPU Unit or a CP-
series Expansion Unit or Expansion I/O Unit.The cable is included with
the Temperature Sensor Unit and cannot be removed.
Note Do not touch the cables during operation. Static electricity may
cause operating errors.
(4) Expansion Connector
Used for connecting CP-series Expansion Units or Expansion I/O Units.
(4) Expansion Connector
(1) Temperature Sensor Input Terminals
(Terminal block is not removable)
(3) Expansion I/O
Connector Cable
(2) DIP Switch
To Next Page
Loading...
