EasyManua.ls Logo

Omron CP1H-X40D - Page 729

Omron CP1H-X40D
810 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
695
Auxiliary Area Allocations by Address Appendix D
A525 A525.00 Ethernet
Option
Board Reset
Flag (Serial
Port 2)
Turn this bit ON to reset the Ethernet
Option Board mounted on the serial
port 2.
OFF to ON:
Reset
Retained Cleared --- ---
A525.01 Ethernet
Option
Board Reset
Flag (Serial
Port 1)
Turn this bit ON to reset the Ethernet
Option Board mounted on the serial
port 1.
OFF to ON:
Reset
Retained Cleared --- ---
A525.08 Ethernet
Option
Board
Restart Flag
(Serial Port 2)
Turn this bit ON to restart the Ether-
net Option Board mounted on the
serial port 2.
OFF to ON:
Restart
Retained Cleared --- ---
A525.09 Ethernet
Option
Board
Restart Flag
(Serial Port 1)
Turn this bit ON to restart Ethernet
Option Board mounted on the serial
port 1.
OFF to ON:
Restart
Retained Cleared --- ---
A526 A526.00 Serial Port 2
Restart Bit
Turn this bit ON to restart the serial
port 2. (Do not use this bit when the
port is operating in Peripheral Bus
Mode.)
This bit is turned OFF automatically
when the restart processing is com-
pleted.
OFF to ON:
Restart
Retained Cleared --- ---
A526.01 Serial Port 1
Restart Bit
Turn this bit ON to restart the serial
port 1.
This bit is turned OFF automatically
when the restart processing is com-
pleted.
0 to ON:
Restart
Retained Cleared --- ---
A527 A527.00
to
A527.07
Online Edit-
ing Disable
Bit Validator
The Online Editing Disable Bit
(A527.09) is valid only when this byte
contains 5A.
To disable online editing from the
CX-Programmer, set this byte to 5A
and turn ON A527.09.
(Online editing refers to changing or
adding to the program while the PLC
is operating in MONITOR mode.)
5A:
A527.09
enabled
Other value:
A527.09 dis-
abled
Retained Cleared --- A527.09
A527.09 Online Edit-
ing Disable
Bit
Turn this bit ON to disable online
editing. The setting of this bit is valid
only when A527.00 to A527.07 have
been set to 5A.
ON: Disabled
OFF: Not dis-
abled
Retained Cleared --- A527.00
to
A527.07
Addresses Name Function Settings Status
after
mode
change
Status at
startup
Write
timing
Related
Flags,
Settings
Word Bits

Table of Contents

Related product manuals