66
DNS Section 3-3
3-3 DNS
DNS Server Setup
Item Contents Default
IP Address Set the IP address for the DNS server.
The DNS server is required when specifying the POP3,
SMTP, or SNTP servers by host name for the mail send
function or mail receive function.
None
Port No. Set the port to be used for connecting to the DNS
server.
This setting does not normally need to be changed.
0
(Number 53 is
used.)
Retry Timer Set the time to elapse before retrying when a connec-
tion to the DNS server fails.
This setting does not normally need to be changed.
0 (10 s)
To Next Page
Loading...
Need help?
General
