Omron CS1W-ETN01 User Manual

11-3SectionCommand/Response Reference
222
Response Codes
Response code Description
0000 Normal
1001 Command too large
11-3-25 ADDRESS INFORMATION READ
Reads FINS node numbers and IP addresses
Command Block
6527
Command
code
Response Block
6527
Command
code
Response
code
Address
information
6 bytes
Number of
addresses
Parameters
Number of Addresses (Response)
The number of pairs of FINS node numbers and IP addresses being returned.
The Ethernet Unit is always 0001 (1 decimal).
Address Information
Pairs of FINS node numbers and IP addresses. Each pair requires 6 bytes and
has the following configuration.
00
FINS node
number
IP address
1
6 bytes
FINS Node Number
Node number set on the Ethernet Unit (hexadecimal).
IP Address
IP address set on the Ethernet Unit (hexadecimal).
Response Codes
Response code Description
0000 Normal
1001 Command too large

Omron CS1W-ETN01 Specifications

General

Brand	Omron
Model	CS1W-ETN01
Category	Controller
Language	English