5-5SectionFINS Server
84
Maximum transfer delay time
= Host computer communications processing time + (0.011 x 256) + 10
+ (256 x 0.02 + 20) = host computer communications processing time + 42 ms
5-5 FINS Server
The following table shows the FINS commands that can be addressed to the
Ethernet Units. The Ethernet Units automatically send responses for these com-
mands. For details, refer to Section 11 FINS Commands Addressed to Ethernet
Units.
MRC SRC Name
04 03 RESET
05 01 CONTROLLER DATA READ
06 01 CONTROLLER STATUS READ
08
01 INTERNODE ECHO TEST
02 BROADCAST TEST RESULTS READ
03 BROADCAST DATA SEND
21
02 ERROR LOG READ
03 ERROR LOG CLEAR
27
01 UDP OPEN REQUEST
02 UDP RECEIVE REQUEST
03 UDP SEND REQUEST
04 UDP CLOSE REQUEST
10 PASSIVE TCP OPEN REQUEST
11 ACTIVE TCP OPEN REQUEST
12 TCP RECEIVE REQUEST
13 TCP SEND REQUEST
14 TCP CLOSE REQUEST
20 PING
50 IP ADDRESS TABLE WRITE
60 IP ADDRESS TABLE READ
61 IP ROUTER TABLE READ
62 PROTOCOL STATUS READ
63 MEMORY STATUS READ
64 SOCKET STATUS READ
65 ADDRESS INFORMATION READ
To Next Page
Loading...
Need help?
General
