7-4SectionFTP Server Application Example
145
7-4 FTP Server Application Example
The following procedure shows how to use the FTP server by connection with
the default login name, CONFIDENTIAL. No password is required.
Note The login name and a password must be set in the CPU Bus Setup for the Ether-
net Unit in the CPU Unit to use any login name other than CONFIDENTIAL.
1, 2, 3... 1. Make sure that a Memory Card is inserted in the CPU Unit and turn ON the
power supply to the PC.
2. If EM File Memory is to be used, create the EM File Memory.
3. Connect to the FTP server from a computer on the Ethernet by entering the
text that is underlined in the following diagram.
IP address of the Ethernet Unit
Results
Login name
4. Enter FTP commands (underlined in the following diagram) to read and
write files. The following directory tree is used in this example
File names read
Results
Change to MEMCARD directory
Results
Transfer DEF.IOM from ABC
directory
Results
/: root
EM
MEMCARD
ABC (subdirectory)
DEF.IOM (file)
To Next Page
Loading...
Need help?
General
