Omron E5AN - Page 289

253
Advanced Function Setting Level Section 5-8
• An ON/OFF count alarm occurs when the ON/OFF counter exceeds the
value set for this parameter.
• It is possible to assign ON/OFF count alarms to auxiliary outputs and to
have them displayed on the screen.
• This function is disabled when the set value is 0.
■ Related Parameters
Control output 1 ON/OFF count monitor (advanced function setting level):
Page 252
• An ON/OFF count alarm occurs when the ON/OFF counter exceeds the
value set for this parameter.
• It is possible to assign ON/OFF count alarms to auxiliary outputs and to
have them displayed on the screen.
• This function is disabled when the set value is 0.
■ Related Parameters
Control output 2 ON/OFF count monitor (advanced function setting level):
Page 252
ra1
Control Output 1 ON/OFF Count Alarm
Set Value
Control output 1 must be supported.
Relay or voltage outputs (for driving
SSR) must be used.
Setting range Unit Default
0 to 9999 100 times 0
Function
Monitor
See
See
ra2
Control Output 2 ON/OFF Count Alarm
Set Value
Control output 2 must be supported.
Relay or voltage outputs (for driving
SSR) must be used.
Setting range Unit Default
0 to 9999 100 times 0
Function
Monitor
See
See