6 - 51
6 Programless Communications
E5@C Digital Temperature Controllers Communications Manual (H175)
6-7 Connecting to NJ-series PLCs
6
6-7-3 PLC Setup
(3) Select the Direct Connection via USB Option and click the OK Button.
(4) Place the PLC online.
Select Controller − Online from the menu bar to change to Online Mode.
Communications Settings in the Serial Communications Unit (SCU)
(1) The PLC operating mode must be changed to PROGRAM mode to enable changing
the SCU communications settings.
Select Controller − Mode − PROGRAM Mode from the menu bar. A confirmation dialog
box will be displayed. Click the Yes Button.
To Next Page
Loading...
