Omron ERT1 Series

35
Overview of System Startup Procedure Section 2-1
• ERT1-WD16CH-1
• ERT1-HD16CH-1
•ERT1-ID32SLH-1
1. Input a name for the connection.
2. Select 01_Output Only.
3. Input the RPI.
4. Select the consume and
produce variables. For the
produce variable, select
Output_35. Make sure that the
sizes of the variables are the
same.
1. Input a name for the connection.
2. Select 01_Output Only.
3. Input the RPI.
4.Select the consume and
produce variables. For the
produce variable, select
Input_5. Make sure that the
sizes of the variables are the
same.
1.Input a name for the connection.
2. Select 01_Output Only.
3.Input the RPI.
4.Select the consume and
produce variables. For the
produce variable, select
Input_6. Make sure that the
sizes of the variables are the
same.