Omron FQ2-S Series User Manual

Command Control
FQ2-S/CH User’s Manual
for Communications Settings
317
5
Appendices
SETDICFIGPARAM or SDFP
Set Dictionary Data Cutout Region Parameters
This command sets the specified dictionary data cutout region parameters.
<Command Format>
<Response Format>
When the Command Is Processed Normally
When the Command Is Not Processed Normally
<Parameter Descriptions>
Dictionary data number Specifies the dictionary data number. (0 to 31)
Region number With the FQ2, specify 0.
Figure number With the FQ2, specify 0.
Parameter 1 to parame-
ter 4
The settings for the dictionary data cutout region are split up and set in parameter 1
through parameter 4.
*
Figure number
(fixed value of 0)
Dictionary data number
(2 digits max.)
Command
Space
(0x20)
Space
(0x20)
Space
(0x20)
Region number
(fixed value of 0)
Space
(0x20)
Space
(0x20)
Space
(0x20)
Space
(0x20)
Dictionary data
number
(2 digits max.)
Command
or
Region number
(fixed value of 0)
Figure number
(fixed value of 0)
Delimiter
Delimiter
Space
(0x20)
Space
(0x20)
Space
(0x20)
Parameter 1
Parameter 1
Parameter 2 Parameter 4
Parameter 4
Parameter 2
SE F IGPARAM
CR
TD CI
DSPF
CR
...
...
Delimiter
CR OK
CR ER
Delimiter
FQ2-S_CH_comm.book 317 ページ ２０１４年６月２６日 木曜日 午前１１時４７分

Omron FQ2-S Series Specifications

General

Brand	Omron
Model	FQ2-S Series
Category	Security Camera
Language	English