Omron H5F - Page 19

Changing (confirming) pulse-output operation settings
【Example２】Changing the pulse width from 30 s to 20 s
② Change the pulse width to 20 s using
Key.
⑤ Press the Key.The Time Switch will
enter run mode and operation will start.
③ Press the Key. The ON time for
program No.1 will be displayed.
(The changes will not be enabled unless
Key is pressed. Make changes, if
necessary, using the and key.)
- 18 -
④ Press the key to enter operation date
setting mode.The operation dates will be
displayed. (Make changes, if necessary,
using the and key.)
≪Note≫
• Operation based on the changed settings will start as soon as the
Time Switch returns to run mode.
The color indicates flashing
①Enter operation time setting mode using
key. The pulse width is displayed.
MODE
MODE
MODE
m / P WD
m / P WD
WRITE
WRITE
h
WRITE
d
30
s
Ｐ
P
PW
20
s
Ｐ
P
PW
740
1
Ｐ
P
AM
PW
Ｐ
P
PW
730
407
AM
P
AM
●
●
PW
SU MO TU WE TH FR SA
SU MO TU WE TH FR SA
SU MO TU WE TH FR SA
SU MO TU WE TH FR SA
SU MO TU WE TH FR SA