Omron H5F - Record of Settings

Usethefollowingcharttorecordimportantsettings.
SA
FR
TH
WE
TU
MO
SU
0123456789101112131415161718192021222324
Basic insulation is used between the power supply and outputs.
Connect the output terminals only to devices without exposed charged
parts and with the basic insulation appropriate for the maximum operating
voltage.
For 24VDC input type
Connect the power supply terminals only to devices without exposed
charged parts and with the basic insulation appropriate for the maximum
operating voltage.
6. EN/IEC Standards
7. Record of Settings
- 34 -