Omron H5S User Manual

Safety Precautions
Suitability for Use
Key to Warning Symbols
CAUTION
Indicates information that, if not followed,
could result in relatively serious or minor
injury, property damage, or faulty operation.
OMRON shall not be responsible for conformity with any standards,
codes, or regulations that apply to the combination of the products in
the customer's application or use of the product.
Take all necessary steps to determine the suitability of the product
for the systems, machines, and equipment with which it will be used.
Know and observe all prohibitions of use applicable to this product.
NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING
SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING
THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO
ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT IS
PROPERLY RATED AND INSTALLED FOR THE INTENDED USE
WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
See also Product catalog for Warranty and Limitation of Liability.
- 1 -

Omron H5S Specifications

General

Output	Relay
Contact Configuration	SPDT
Contact Rating	5 A at 250 VAC
Number of Digits	4
Control Output	Relay
Type	Digital Timer
Operating Temperature	-10°C to 55°C
Supply Voltage	100 to 240 VAC
Operating Modes	Flicker, Interval
Time Range	0.1 s to 9999 h
Power Supply Voltage	100 to 240 VAC, 12 to 24 VDC
Time Setting Range	0.1 s to 9999 h
Power Supply	100 to 240 VAC, 12 to 24 VDC