Omron H5S - F5: Date Format Selection

- 52 -
Weekly
2 chnls
Yearly
2 chnls
Yearly
4 chnls
The displayed date format is selectable between "month. day"
and "day. month".
Setting
The setting is made in F5 (date format selection) of initial setting mode.
Press for 3 s or more in program
setting mode to enter initial setting mode.
Give short presses on and
move to the F5 display.
Change the setting using or .
(The symbol on the sub-display will flash.)
Press to confirm the setting.
(The symbol on the sub-display will change from flashing to lighting.)
Note
• The date format set in this function corresponds to all the displays showing a
month and a day such as for "time adjustment", "setting programs" and "setting
holidays".
• To leave initial setting mode, press for 3 s or more.
• If is pressed again before confirming the setting, the setting is
cancelled.
6-6-5. F5: Date Format Selection
Parameters
mm.dd
"month. day"
dd.mm
"day. month"
The inverted character indicates the default.
h
m
The color indicates flashing.
TIME ADJ
TIME ADJ
TIME ADJ
TIME ADJ
WRITE
Set the Mode Switch to RUN.