Omron H5S - Checking the Settings

- 36 -
Weekly
2 chnls
Yearly
2 chnls
Yearly
4 chnls
Press one of the DAY keys for 2 s or more
in run mode to check settings for the day.
(“chec” flashes and the time of the next
On time is displayed.)
The set times for one day can be checked.
Press .
The display shows the time of the next
change in output state.
If is pressed with the last
setting of the day displayed, “end” is
displayed for 2 s before the Time Switch
automatically returns to run mode.
Note
• This mode can be entered from run mode only.
• Output is not turned ON or OFF according to displays but according to settings
and the current time.
• Holiday settings (
5-1), day override operation settings (
5-4 weekly type only), and yearly settings ( 4-6 yearly types only)
are also displayed.
• If no Key input is entered within 30 s or if one of the DAY keys is pressed again
for 2 s or more, the display automatically returns to run mode.
5-3. Checking the Settings
The color indicates flashing.
SUN MON TUE WED THU FRI SAT
SUN MON TUE WED THU FRI SAT
WRITE
WRITE