- 55 -
Weekly
2 chnls
Yearly
2 chnls
Yearly
4 chnls
"C" and "D" are not displayed in
the 2 channel type.
Programs can be automatically switched according to the set
seasons.
Setting
The setting is made in F8 (season switching) of initial setting mode.
Press for 3 s or more in program
setting mode to enter initial setting mode.
Give short presses on and
move to the F8 display.
Change the setting using or .
(The symbol on the sub-display will flash.)
Press to confirm the setting.
(The symbol on the sub-display will change
from flashing to lighting.)
6-6-8. F8: Season Switching
Parameters
off
No switching
on
Automatic switching (Specify the period in F9.)
The inverted character indicates the default.
Note
•
When this function is set to ON, the number of programmable steps is
changed. (Refer to "Section 4. Ratings and characteristics" in the
Installation.)
•
If the setting is changed between ON and OFF, all the set weekly programs
will be cleared.
•
This function switches weekly programs but not yearly programs.
• To leave initial setting mode, press for 3 s or more.
The color indicates flashing.
TIME ADJ
TIME ADJ
TIME ADJ
h m
WRITE
Set the Mode Switch to RUN.
To Next Page
Loading...
