- 24 -
Set the Mode Switch to P1 or P2. 1
See Section 4-5 for 4 channel type.
Set the program in the following order.
March 25 (Start date)
March 25 (End date)
18:00 (ON time)
22:15 (OFF time)
Press for 1s or more.
(The display moves to yearly program
setting mode.)
Example 1 The Time Switch turns ON a circuit at 18:00 and
turns it OFF at 22:15 on March 25 every year.
Specify the start date using ,
and .
2
Year can be set from the current year to the
next two years as shown in the following
example. If the year is set to "--", the
operation performs every year.
<
Example
>If the current year is 2006,
the displayed year changes as follows.
--
06 07 08 -- 06
Weekly
2 chnls
Yearly
2 chnls
Yearly
4 chnls
Day period
Time period
YEAR
4-7. Yearly Timer Operation
The color indicates flashing.
SUN MON TUE WED THU FRI SAT
P1
P2
RUN
PULSE
TIMER
Y M
D
To Next Page
Loading...
