- 20 -
Note
• If multiple settings are required, repeat the steps through .
• Both the ON time and pulse width must be set.
• All the set weekly programs can be checked by pressing in program
setting mode.
• When the Mode Switch is set to P1 or P2 (to PRGM for 4 channel type), the
Time Switch stops automatic operation. To forcibly turn ON or OFF the output,
use the OUT ON/OFF switches.
• The set data will be cleared if the OUTPUT setting switch is moved between the
TIMER and PULSE positions after the data has been set.
WRITE
To Next Page
Loading...
