- 22 -
Note
• If multiple settings are required, repeat the steps through .
•
• All the set weekly programs can be checked by pressing in program
setting mode.
• When the Mode Switch is set to P1 or P2 (to PRGM for 4 channel type), the
Time Switch stops automatic operation. To forcibly turn ON or OFF the output,
use the OUT ON/OFF switches.
• Set Cyclic operation so as not to overlap other operations in individual circuits.
• The set data will be cleared if the OUTPUT setting switch is moved between the
TIMER and PULSE positions after the data has been set.
SUN MON TUE WED THU FRI SAT
SUN MON TUE WED THU FRI SAT
Press .
Set the ON time period with and . 2
h m
WRITE
Press .
Set the OFF time period with and . 2
h m
WRITE
Press to confirm the settings.
WRITE
WRITE
1
If one or more programs have already been set, the display starts showing the set programs.
To add another program, press repeatedly until "
--
:
--
" is displayed.
2 Holding down these Keys rapidly advances the value.
WRITE
Set the Mode Switch to RUN.
⑧
the Key that was last pressed.
decrements the value of
Pressing
HOLIDAY/
SELECT PRGM/or
To Next Page
Loading...
