- 30 -
Example 2 Clearing all the settings of each circuit.
Press to clear all the settings of the circuit.
Note
•
If is pressed while "clr" is flashing, clearing operation is cancelled.
• The current time, set data of initial setting mode, holiday settings, or day
override settings cannot be cleared in the same manner.
• Yearly programs are also cleared with the yearly types.
The color indicates flashing.
SUN MON TUE WED THU FRI SAT
Set the Mode Switch to the position of the
circuit whose settings are to be cleared.
See Section 4-5 for 4 channel type.
Hold down for 3 s or more.
("clr" appears on the main display and
"all" on the sub-display.)
CLEAR
WRITE
CLEAR
Set new program or set the Mode Switch to RUN.
To Next Page
Loading...
