14
When necessary
10. Guest Mode (Unrecorded Mode)
When this mode is used, your measurement results will not be recorded.
1.
Press the button to turn on the power.
The power turns on. Personal number "1" blinks.
2.
Select and conrm " ".
Select "GUEST" with the button, and then press the button to conrm.
3.
Enter personal data.
3.1 Set the birth date
Press the
button to set the birth date and press the button to
conrm.
• Setting range of year: 1900 to 2045
• During setting the year and date, hold down the
button to advance
rapidly in increments of 10.
3.2 Set the gender
Press the
button to set the gender (MALE) or (FEMALE)
and press the
button to conrm.
3.3 Set the height
Press the
button to set the height and press the button to conrm.
• Press continuously to rapidly advance in increments of 10 cm.
After all the settings are displayed for your conrmation, "0.0 kg" appears on
the display.
The power turns off if the unit is not used for 1 minute after "0.0 kg" is displayed.
Year
Month
Day