17
When necessary
13.
Delete the Communication Setting
If you want to stop the use of the "OMRON connect" app or delete the communication settings from
your smart device, please operate as follows. All the communication settings recorded in the unit will
be deleted.
1.
Press and hold the button more than 2 seconds.
" " and the Bluetooth symbol blink.
2.
Press and hold the button more than 2 seconds again.
" " and "CLr" blink.
3.
Press the button to conrm.
The power turns off if the unit is not used for 10 seconds after "CLr" is
displayed.
When necessary
14.
Maintenance and Storage
How to Clean the Unit
• Always keep the unit clean before use.
• Wipe the unit with a soft dry cloth. If necessary, use a cloth moistened with water or detergent and
squeeze it well before wiping the unit, then wipe off with a dry cloth.
• Do not use benzene or thinner, or other volatile solvents to clean the unit.
• Do not wash the unit with water.
Care and Storage
• Do not store the unit in the following conditions:
- Humidity, where moisture or water may get into the unit
- High temperatures, direct sunlight or dusty places
- Places with the risk of sudden shocks or vibrations
- In places where chemicals are stored or where corrosive gas is present.
• Do not carry out repairs of any kind by yourself. This product is calibrated at the time of manufacture.
If at any time you question the accuracy of measurements, please contact your authorized OMRON
distributor. In general it is recommended to have the device inspected every 2 years to ensure
correct functioning and accuracy.
To Next Page
Loading...
Need help?
General
