10
6.2 About the "0 kg correction" (Caution for storing)
The unit regularly corrects accuracy automatically when it is not in use.
• If the unit is placed as shown below this accuracy correction function does not work, implement the
"0 kg correction" before taking the measurement.
The unit is leaning against
the wall or other objects
The unit is placed
upside down
The unit is placed on
an object
An object is placed
on the unit
6.3 How to implement the "0 kg correction"
1.
Place the unit on a hard and at oor.
2.
Press the button to turn on the power.
3.
Select your personal number or " ".
Select your personal number or " " with the button and then
press the
button to conrm.
4.
When the "0.0 kg" is displayed, press the button (2 seconds or longer) to turn
off the power.
This completes the "0 kg correction". Wait for 5 seconds, and then take a measurement.
Operating instructions
7. Take a Measurement
When person steps onto the unit, it will be powered on to recognize the personal number automatically
and start the measurement.
Wrong personal number may be displayed in the following cases.
• Users of similar body type and body weight
are measured.
• Your body weight has changed since last
measurement.
A 62.3 kg
no 1
B 62.7 kg
21
16
30
･･･
30 days later
C 62 kg
C 67 kg
no 1 no 3
If inaccurate recognition continues, select your personal number to take a measurement. (Refer
to Section 9.)
To Next Page
Loading...
Need help?
General
