8
Before using the unit
5. Register the Personal Data
For the measurement of body composition, it is necessary to register your personal data (birth date,
gender, height). The registered data can be stored for up to 4 persons.
• The personal data can be registered from "OMRON connect" app as well.
1.
Press the button to turn on the power.
The power turns on. Personal number "1" blinks. Birth date ( ) is displayed.
2.
Select and conrm your personal number.
Press the button to select your personal number and press the button to conrm.
3.
Set the birth date.
Press the button to set the birth date and press the button to
conrm.
• Setting range of year:1900 to 2045
• During setting the year and date, hold down the
button to advance
rapidly in increments of 10.
4.
Set the gender
Press the button to set the gender (MALE) or (FEMALE)
and press the
button to conrm.
5.
Set the height.
Press the button to adjust the height and press the button
to conrm.
• Press continuously to rapidly advance in increments of 10 cm.
• After all the settings are displayed for your conrmation, "0.0 kg"
appears on the display.