Omron HBF-255T - Performing a Measurement

9
Operating instructions
6. How to Take a Measurement Accurately
6.1 Correct postures during the measurement
6.2 About the "0 kg correction" (Caution for storing)
The unit regularly corrects accuracy automatically when it is not in use.
• If the unit is placed as shown below this accuracy correction function does not work, implement the "0 kg correction" before
taking measurement.
The unit is leaning against the
wall or other objects
The unit is placed upside
down
The unit is placed on an
object
An object is placed on
the unit
The unit is leaning against the
wall or other objects
The unit is placed upside
down
The unit is placed on an
object
An object is placed on
the unit
The unit is leaning against the
wall or other objects
The unit is placed upside
down
The unit is placed on an
object
An object is placed on
the unit
The unit is leaning against the
wall or other objects
The unit is placed upside
down
The unit is placed on an
object
An object is placed on
the unit
The unit is leaning against
the wall or other objects
The unit is placed
upside down
The unit is placed on
an object
An object is placed
on the unit
6.3 How to implement the "0 kg correction"
1.
Place the unit on a hard and level oor.
2.
Touch the button to turn on the power.
3.
When the "0.00 kg" is displayed, press the OFF button or touch the
button (3 seconds or longer) to turn off the power.
This completes the "0 kg correction". Wait for 5 seconds, and then take a measurement.
Take a measurement on
a hard and level oor.
Note
• A cushioned oor
surface, such as a
mat or carpet, may
result in an inaccurate
measurement.
Step onto the unit with
your bare feet.
Place the arches of
your feet onto the
center of the unit.
Note
• Stepping onto the
unit with socks or
footwear on will result
in an inaccurate
measurement.
Do not bend your knees
during measurement.