10
Operating instructions
7. Take a Measurement
When person steps onto the unit, it will be powered on to recognize the personal number automatically and start the measurement.
1.
Take a measurement when the power of the unit is off.
• If the unit is not on a hard and level oor, please implement the “0.00 kg” correction before taking measurement. (Refer to
Section 6.)
• When you step onto the unit, the power automatically turns on, Estimated personal number and measurement results are
displayed.
Please confirm the correct
measurement method before
your measuring.
Estimated personal number
Measurement result
Weight is displayed in 50 grams.
2.
When personal number and measurement results are displayed, the measurement is completed.
Step off the unit.
3.
Conrm your personal number.
■
If your personal number is correct…
Touch the button to conrm your personal number.
■
If your personal number is incorrect…
Before the power turns off, select your personal number with the
and button, and then touch the button to conrm.
■
If you conrmed your personal number incorrectly…
Before the power turns off, press the Back button and then touch the and button so that you can select your
personal number again.
Estimated personal number
disappears, and last
value is displayed.
Estimated personal number
Wrong personal number may be displayed in the following cases.
• Users of similar body type and body weight are
measured.
• Your body weight has changed since last measurement.
A 70.10 kg
no 1
B 70.15 kg
21
16
30
･･･
30 days later
C 70.05 kg
C 75.05 kg
no 1 no 3
If inaccurate recognition continues, select your personal number to take a measurement. (Refer to Section 10.)
To Next Page
Loading...
Need help?
General
