19
Operating instructions
15.
Delete the Communication Setting
If you want to stop the use of the "OMRON connect" app or delete the communication settings from your smart device, please
operate as follows. All the communication settings recorded in the unit will be deleted.
1.
Press and hold the and button more than 3 seconds.
The screen below is displayed.
2.
Touch the button to conrm.
If you see "OK" as shown below, it is complete.
"Pi Pi"
Care and maintenance
16.
Maintenance and Storage
How to Clean the Unit
• Always keep the unit clean before use.
• Wipe the unit with a soft dry cloth. If necessary, use a cloth moistened with water or detergent and squeeze it well before wiping
the unit, then wipe off with a dry cloth.
• Do not use benzene or thinner, or other volatile solvents to clean the unit.
• Do not wash the unit with water.
Care and Storage
• Do not store the unit in the following conditions:
- Humidity, where moisture or water may get into the unit
- High temperatures, direct sunlight or dusty places
- Places with the risk of sudden shocks or vibrations
- In places where chemicals are stored or where corrosive gas is present
• Do not carry out repairs of any kind by yourself. This product is calibrated at the time of manufacture. If at any time you question
the accuracy of measurements, please contact your authorized OMRON distributor.
To Next Page
Loading...
Need help?
General
