Omron K3NX - Page 37

29
2. Press the Shift Key to display the prior set value 199.99 for changing. The
PROG indicator will flash.
Set Value LED Display Model Basic Model
3. Press the Up and Shift Keys to set the value to 005.00. The input will be vali-
dated automatically if no change is made for five seconds. The inp.2 input
value 2 setting will be displayed again.
Note Press the Mode Key to enter the set value immediately. The dsp.2 dis-
play value 2 setting will be displayed for setting the next parameter.
Set Value LED Display Model Basic Model
4. Press the Mode Key to display the dsp.2 display value 2 setting.
Set Value LED Display Model Basic Model
5. Press the Shift Key to display the set value 19999 for changing. The PROG
indicator will flash.
Set Value LED Display Model Basic Model
6. Press the Up and Shift Keys to set the value to 10000. The input will be vali-
dated automatically if no change is made for five seconds. The dsp.2 display
value 2 setting will be displayed again.
Note Press the Mode Key to enter the set value immediately. The inp.1 in-
put value 1 setting will be displayed for setting the next parameter.
Set Value LED Display Model Basic Model
7. Press the Mode Key to display the inp.1 input value 1 setting.
Set Value LED Display Model Basic Model
Setting Mode
Section 3-2
AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr