Omron K3NX - Startup Compensation Time (Stine)

44
Startup Compensation Time
• The interval between the moment the K3NX is turned and the moment the
K3NX enters measurement operation is set in the option menu.
Setting range Unit Default
0.0 to 99.9
s 0.0
The K3NX will display “00000” with all outputs turned OFF until the K3NX is in
measurement operation.
Power supply
Input value
Measured value
t: Startup compensation time
Measurement starts
Follow the steps described below to set the startup compensation time to 2 seconds.
Set Value LED Display Model Basic Model
1, 2, 3... 1. Press the Mode Key for more than one second while the opt option menu is
displayed. The aUg average processing setting will appear.
Set Value LED Display Model Basic Model
2. Press the Mode Key to display the stine startup compensation time setting.
Set Value LED Display Model Basic Model
stine
FUNCTION
SETTING
REFERENCE
SETTING
EXAMPLE
Setting Mode
Section 3-2
AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr