2) When the desired pressure has been
achieved, release the inflation bulb.
Remain still and do not talk.
• The current time continues to be
displayed while the cuff is being inflated.
NOTE: Do not inflate the arm cuff more than necessary.
3. Measurement starts.
Measurement starts automatically after
you stop inflating the arm cuff.
Decreasing numbers appear on the
display and the heartbeat symbol
flashes.
NOTES:
• Remain still and do not talk during measurement.
• To cancel a measurement, press the ON/OFF button to turn off the
monitor and press the air release button to release the air in the arm
HOW TO TAKE A MEASUREMENT
18 19
HOW TO TAKE A MEASUREMENT
Correct
Posture
Do not talk during
the measurement.
Arm cuff at
heart level.
Sit upright
with your
back straight.
Common Causes of Inaccurate Results
Arm cuff is too loose. Movement or talking
during measurement.
Leaning forwards.
NOTE: If the arm cuff is at a lower position
than your heart use cushions etc., to
adjust the height of your arm.
To Next Page
Loading...
Need help?
General
